Custom-made and customizable boots
Custom-made and customizable boots
How to Measure the Right Size
To choose the perfect boot, you need 3 measurements: height, calf, and opening below the knee.
HEIGHT
With your knee slightly bent, measure from your heel to about 1 cm below your knee.
CALF
In the same position, measure the circumference at the widest point of your calf.
OPENING BELOW THE KNEE
Still keeping your knee slightly bent, measure the maximum circumference just below your knee
.
Before you start, wear riding breeches and socks, so that you take the measurements under the same conditions in which you will wear the boots. During the measurement, keep your leg resting on the ground and your knee slightly bent.
Maintain the same leg position for all three measurements and do not overtighten the tape measure.
On the product page, scroll through the images to view the size chart. Next to the size selection, you will also find the Size Guide.
How to read the chart
Each chart is divided by Size (e.g., 35, 36, etc.), to which a specific height corresponds.
Each size includes 4 MIS, based on calf measurement:
- MIS 000 — narrowest calf
- MIS 0 — narrow calf
- MIS 02 — medium calf
- MIS 04 — wide calf
For each MIS, you will find two measurements in centimeters:
- Top opening — circumference below the knee
- Calf — maximum calf circumference
How to find your size
- Take your 3 measurements: Height, Calf, and Top opening.
- Find your Size: choose the number you normally use for shoes (our boots run large)
- Locate the MEASUREMENT where your Calf measurement falls within the indicated range.
- Check that the Top opening also falls within the range of the same MIS.
📌Note: all our boots are equipped with a small elastic strip, designed to ensure greater wearability and comfort.