MEASUREMENT INSTRUCTIONS
To choose the perfect boot, you need 3 measurements: height, calf, and opening below the knee.
HEIGHT
With your knee slightly bent, measure from your heel to approximately 1 cm below your knee.
CALF
In the same position, measure the circumference at the widest point of your calf.
OPENING BELOW THE KNEE
Still keeping your knee slightly bent, measure the maximum circumference just below your knee.
Before you start
Wear riding breeches and socks so that you take measurements under the same conditions in which you will wear the boots. During measurement, keep your leg on the ground and your knee slightly bent.
Maintain the same leg position for all three measurements and do not pull the tape measure too tight.
HOW TO USE THE SIZE CHART
On the product page, scroll through the images to view the size chart. Additionally, next to the size selection, you will also find the Size Guide, which you can consult to choose the most suitable size for you.
Each chart is divided by Size (e.g., Size 35, Size 36…), which corresponds to a fixed boot height.
Within each size, you will find 4 rows, one for each calf measurement:
* MEAS 000 — narrowest calf
* MEAS 0 — narrow calf
* MEAS 02 — medium calf
* MEAS 04 — wide calf
For each row, you will find two columns with intervals expressed in centimeters:
* Opening (cm) — the circumference below the knee
* Calf (cm) — the maximum calf circumference
HOW TO FIND YOUR SIZE
1. Take your 3 measurements as explained above: Height, Calf, and Opening.
2. Find your Size, choose the number you normally wear for shoes. (our boots fit generously, if you are undecided between two sizes, we recommend the smaller size)
3. Within that size, locate the row (MEAS 000, MEAS 0, MEAS +2 or MEAS +4) where your Calf measurement falls within the indicated range.
4. Check that your Opening measurement also falls within the range of the same row.
📌 Note: All our boots are equipped with a small elastic strip, designed to ensure greater wearability and comfort.